120 PSI Air Source Kits come with a low amp-draw, 25% duty cycle, X275 compressor mounted on a 150 PSI-rated 1.5 gallon air tank with 5 ports. 120 PSI Air Source kits come with a pre-wired 90 PSI on / 120 PSI off pressure switch. The 120 PSI Air Source Kit comes complete with a 1/4” NPT brass drain cock, 1/4” NPT ASME coded and certified safety valve, 1/2” NPT port compression fitting for 3/8” (I.D.) air line pre-installed. To use, simply connect the pressure switch to fused power, make a solid ground, and connect an air line to the compression fitting. The use of a 40-amp relay and an appropriately-rated fuse is strongly recommended to preserve the life of the pressure switch.
13886501872
13809667059
FEATURES |
– X275 Air Compressor |
– Thermal Overload Protector |
– 1.5 Gallon Air Tank |
– Pressure Switch (90 PSI On / 120 PSI Off) |
– Safety Valve (145 PSI) |
– Drain Cock |
– Leader Hose with Check Valve |
– |
SPECIFICATIONS |
– 12-Volt |
– Permanent Magnetic Motor |
– Duty Cycle: 25% @ 100 PSI |
– Max. Working Pressure: 120 PSI |
– Max. Amp Draw: 20 Amps |
– Ingress Protection Rating: IP54 |
– Dimensions: 15.2″L x 5.9″W x 12.8″H |
– Net Weight: 15.65 lbs. |
PERFORMANCE DATA
PSI |
CFM |
A |
BAR |
LPM |
A |
0 |
2.03 |
10 |
0 |
57.5 |
10 |
10 |
1.17 |
12 |
1.0 |
32.0 |
13 |
20 |
1.11 |
13 |
2.0 |
30.0 |
14 |
30 |
1.04 |
15 |
3.0 |
28.5 |
16 |
40 |
1.01 |
15 |
4.0 |
26.5 |
16 |
50 |
0.97 |
16 |
5.0 |
24.5 |
17 |
60 |
0.92 |
16 |
6.0 |
22.5 |
17 |
70 |
0.88 |
17 |
7.0 |
21.5 |
18 |
80 |
0.83 |
17 |
8.0 |
20.0 |
18 |
90 |
0.79 |
17 |
9.0 |
18.5 |
18 |
100 |
0.76 |
18 |
10 |
17.0 |
17 |
110 |
0.72 |
18 |
|||
120 |
0.67 |
18 |
* Supply Voltage: 13.8 Volts
FILL RATES
1.5 GALLON TANK |
FILL RATE |
0 to 120 PSI |
2 min. 10 sec. (±10 Sec.) |
90 to 120 PSI |
35 sec. (± 5 Sec.) |